Euchner ZSM2301-105075 Deadman switch
 |
The Euchner deadman switch can be used to control the robots speed.This allows the operator to move the robot at low speed while standing close to it. |
 |
Read and understand operator’s manual and all other safety instructions before using this equipment. |
1. Use following tools
|
|
2. Description
2.1. 3-stage function
There are 3 stages in which only one enabling function (the middle one, also known as the actuating point).In the other 2 stages the enabling function will be removed.Stage 1 is the not pressed position (rest position), whilst the 3rd stage is the fully pressed position (also known as the panic function).
2.2. Stop command device
Machine stop (black, with pull-to-reset button) on the switch housing, for different wiring concepts.
Lower position, protected by anti-kink cable gland in case of a fall.
2.3. Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
2.4. LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
2.5. Reset button ©
Button for reset function directly from the enabling switch.
2.6. + and – buttons
These buttons can be configured individually.For example for moving axes in the positive or negative direction.
2.7. Cable
The high-quality connection cables are available in a coiled version.
3. How to get further help
Do not hesitate to contact us when you need additional support beyond the documents provided in the RoboJob Service Knowledge Base.
You may contact the RoboJob Service department using following means:
-
Help Center: service.robojob.eu
-
Email: service@robojob.eu
-
Phone: +32 15 70 89 70
We kindly ask you to provide us the following information:
-
Serial number xx-xx-xxx
-
Description of the fault or defective part
-
Exact error code or message
-
What did the robot do
-
What was the robot supposed to do
-
Pictures or videos
You can send this information to us via email.To send large files you may make use of a file transfer service like WeTransfer: robojob.wetransfer.com.
An automatic confirmation will be sent upon receipt of your mail.